Fold-Up Wall Desks

Fold-up wall desks have been helping conserve valuable space in medical facilities, office buildings, manufacturing plants and other facilities since 1953.  Cost effective and easy to install, fold-up wall desks come in an array of models and finishes.  One is perfect for your application.  Each features a compact design and sturdy construction.  Generous writing surfaces are augmented with spring clips and storage pockets for forms, notebooks, and other work station essentials.

Sturdy Construction
Each wood model is individually crafted out of industrial grade, high-density fiber board and MDF board. Each have mitered corners with glued spines for added strength and are finished in a high pressure laminate that is scratch resistant and washable. Wood models feature full length, nickel plated piano hinges and heavy-duty hardware for long lasting performance.

Metal model fold-up desks are also hand crafted with commercial grade materials: heavy gauge steel with tamper-proof spot welds and rivets, durable baked-on epoxy finish (or stainless steel), and mechanical friction catches proven reliable over decades of use.

Easy to Install
Fold-up wall desks install in just a matter of minutes. They come fully assembled and attach to the wall with just four screws secured through predrilled holes.

Compact Design
Depending on the model, fold-up desks lay from 2” to 3-3/4” close to the wall. Yet when unfolded, the writing surfaces are generous and sturdy.

Available Models

Security
Locks

Battery
Powered
Night Light

Construction
Material

Composite of 16, 18 and 20 gauge Heavy-duty Steel Fabrication, Tamper proof spot weld and rivet construction. Durable Baked-on Epoxy Powder Coat finish, resists mars and scratches.

Generous Writing and Working surface 20 inches wide by 15 inches deep.

Features a spring clip for paper/note pad and three "special use" pockets.

Outside Dimensions: 15"H x 20"W x 2"D
Writing Surface Dimensions: 15"H x 20"W
Weight: 14 lbs.
Capacity: Spring Clip for paper pad and three special use pockets.
Material: 16, 18 and 20 gauge Heavy Duty steel, tamper proof spot weld and rivet construction.
Finish: Durable baked-on epoxy powder coat paint, resists mars and scratches, available in Beige, Grey or White. Stainless Steel available (This Model Only)
Hardware: Zinc plated heavy-duty steel male/female type friction catches and slide bar lid supports
Mounting: Four 3/16" pre-punched holes on 16" centers for stud alignment (Mounting hardware not supplied) (Instructions for mounting included)
Optional Features: Locks (Keyed alike or differently). Battery powered night light.

Security
Locks

Battery
Powered
Night Light

MODEL FD200

Construction
Material

Similar Composite and Construction as the Model FD 100 with same generous Writing and Working surface. This model features 2 spring clips side by side and a full length bottom pocket suitable for holding 2 clip board type binders.

Durable Baked-on Epoxy Powder Coat finish, resists scratches and mars.

Outside Dimensions: 15"H x 20"W x 2"D
Writing Surface Dimensions: 15"H x 20"W
Weight: 14 lbs.
Capacity: Two spring clips for two paper pads, full length bottom pocket suitable for two clip board type binders.
Material: 16, 18 and 20 gauge Heavy Duty steel, tamper proof spot weld and rivet construction.
Finish: Durable baked-on epoxy powder coat paint, resists mars and scratches, available in Beige or Grey.
Hardware: Zinc plated heavy-duty steel male/female type friction catches and slide bar lid supports
Mounting: Four 3/16" pre-punched holes on 16" centers for stud alignment (Mounting hardware not supplied) (Instructions for mounting included)
Optional Features: Locks (Keyed alike or differently). Battery powered night light.

Security
Locks

Battery
Powered
Night Light

MODEL FD300

Construction
Material

Composite of 14, 18 and 20 gauge Heavy-duty Steel Fabrication with tamper proof spot weld and rivet construction. Durable Baked-on Epoxy Powder Coat finish.

This model features a single spring clip for paper/note pad and a larger capacity 2" Full length bottom pocket designed to accommodate a ring bound notebook

Outside Dimensions: 15"H x 20"W x 3"D
Writing Surface Dimensions: 15"H x 20"W
Weight: 16 lbs.
Capacity: Spring Clip for paper pad and 2" bottom pocket for ring bound notebook.
Material: 14, 18 and 20 gauge Heavy Duty steel, tamper proof spot weld and rivet construction.
Finish: Durable baked-on epoxy powder coat paint, resists mars and scratches, available in Beige or Grey.
Hardware: Zinc plated heavy-duty steel male/female type friction catches and slide bar lid supports
Mounting: Four 3/16" pre-punched holes on 16" centers for stud alignment (Mounting hardware not supplied) (Instructions for mounting included)
Optional Features: Locks (Keyed alike or differently). Battery powered night light.

Battery
Powered
Night Light

Self-Closing
Mechanism

MODEL FD400

Construction
Material

Fabricated with Industrial High-density particle board and MDF board, scratch resistant and washable. Generous Writing/Working surface 20 inches wide by 19 inches deep. Full length Nickel plated piano hinge and Nickel plated Heavy-duty steel Lid supports. Available with "Manual-close" (standard) or with the "Self-closing" or "Assisted Self-closing mechanism.

Outside Dimensions: 19 1/8"H x 20"W x 3 3/4"D
Writing Surface Dimensions: 19"H x 20"W
Weight: 18 lbs.
Capacity: Holds one 2 3/4" spine width binder/chart.
Material: Industrial grade high-density particle board and MDF board.
Finish: Wilsonart Bannister Oak high pressure, industrial grade laminate, scratch resistant and washable.
Hinge: Full length, nickel plated piano hinge.
Hardware: Nickel plated heavy-duty steel lid supports and magnetic catches.
Mounting: Four 1/4" pre-drilled holes on 16" centers for stud alignment (Mounting hardware not supplied) (Instructions for mounting included)
Optional Features: Self-closing mechanism. Locks (Keyed alike or differently). Battery powered night light. MC15 & MC30 Side and top add on Supply Cabinets.

Battery
Powered
Night Light

Self-Closing
Mechanism

MODEL FD400

Construction
Material

The FD 450 was designed to hold 2 charts or binders, side by side and features a larger Writing/Working surface of 30 inches wide by 19 inches deep. Fabricated with Industrial High-density particle board and MDF board, scratch resistant and washable. Full length Nickel plated piano hinge and Nickel plated Heavy-duty steel Lid supports.

Available with "Manual-close" (standard) or with the "Self-closing" or "Assisted Self-closing mechanism.

Outside Dimensions: 19 1/8"H x 30"W x 3 3/4"D
Writing Surface Dimensions: 19"H x 30"W
Weight: 25 lbs.
Capacity: Holds two 2 3/4" spine width binders/charts.
Material: Industrial grade high-density particle board and MDF board.
Finish: Wilsonart Bannister Oak high pressure, industrial grade laminate, scratch resistant and washable.
Hinge: Full length, nickel plated piano hinge.
Hardware: Nickel plated heavy-duty steel lid supports and magnetic catches.
Mounting: Four 1/4" pre-drilled holes on 16" centers for stud alignment (Mounting hardware not supplied) (Instructions for mounting included)
Optional Features: Self-closing mechanism. Locks (Keyed alike or differently). Battery powered night light. MC15 & MC30 Side and top add on Supply Cabinets.

Security
Locks

Battery
Powered
Night Light

MODEL FD500 SC

Construction
Material

This Self-closing model is constructed of a composite of 14, 16 and 20 gauge Heavy-duty Steel, with tamper proof spot weld and rivet construction. Generous Writing/Working surface 20 inches wide by 12.5 inches deep. Durable Baked-on Epoxy Powder Coat finish.

Available with "Self-closing" or "Assisted Self-closing mechanism.

Outside Dimensions: 15"H x 20"W x 3 1/4"D
Writing Surface Dimensions: 12.5"H x 20"W
Weight: 15 lbs.
Capacity: Holds one 2-3/4" x 11-3/4" x 11-3/4" chart.
Material: 14, 16 and 20 gauge heavy duty steel, tamper proof spot-weld and rivet construction.
Finish: Durable baked-on epoxy powder coat paint, resists mars and scratches, available in Beige Grey or White.
Mounting: Four 1/4" pre-punched holes on 16" centers for stud alignment (Mounting hardware not supplied) (Instructions for mounting included)
Optional Features: Locks (Keyed alike or differently). Battery powered night light.

Security
Locks

Battery
Powered
Night Light

MODEL FD550 SC

Construction
Material

The FD 550 SC was designed to hold 2 charts or binders, side by side and features a larger Writing/Working surface of 26 inches wide by 17 inches deep. Made of a composite of 14, 16 and 20 gauge Heavy-duty Steel, tamper proof rivet construction and Durable Baked-on Epoxy Powder Coat finish.

Available with "Self-closing" or "Assisted Self-closing mechanism.

Outside Dimensions: 19"H x 26 1/2"W x 3 5/8"D
Writing Surface Dimensions: 17"H x 26"W
Weight: 29 lbs.
Capacity: Holds two 2 3/4" spine width binders/charts.
Material: 14, 18 and 20 gauge Heavy Duty steel, tamper proof rivet construction.
Finish: Durable baked-on epoxy powder coat paint, resists mars and scratches, available in Beige or Grey.
Hardware: Zinc plated heavy-duty steel male/female type friction catches and slide bar lid supports
Mounting: Four 1/4" pre-punched holes on 16" centers for stud alignment (Mounting hardware not supplied) (Instructions for mounting included)
Optional Features: Locks (Keyed alike or differently). Battery powered night light

Available Options

Weighing only 2 lbs. each, these Heavy-duty (20 gauge Steel) File Holders can be mounted on wall or door. Compact and convenient, 11" high by 12" wide by 1.5" deep, with durable baked-on Epoxy Powder coat finish. Available in BEIGE or WHITE.